Comtrol DM AIR - Manual (Page 12)

12 - DeviceMaster AIR User Guide: 2000365 Rev. C Hardware Installation and WLAN Configuration
Connecting the Hardware and Initial Configuration
13. To configure the DeviceMaster AIR to operate in Infrastructure mode
(default), use the following procedure.
Note: See Ad Hoc Mode on Page 14 if you want to configure the DeviceMaster
AIR to operate in Ad Hoc mode.
Infrastructure Mode
Infrastructure mode requires an access point or wireless router for operation.
a. Enter the SSID for the access point.
b. Select Site Survey to select a wireless network.
Note: Optionally, you can enter the MAC address of the access point or
wireless router and skip to Step e on Page 13.
c. Select the appropriate network and Connect.
Your site may have multiple networks available.