Socketserver – Comtrol DM AIR User Manual
Page 42
42 - DeviceMaster AIR User Guide: 2000365 Rev. C
Updating Firmware
SocketServer
SocketServer
Use this procedure to upload SocketServer.
1.
Select the Query button. If you have an NS-Link
driver running, it will display the NS-Link
version.
Note: If you did not close the application after
updating the Bootloader, the application
will respond with the Bootloader version. If
this occurs, close the application and
restart it.
2.
Select Ok after you confirm that it is the
DeviceMaster AIR that you want to update.
Note: If it is not the correct DeviceMaster
AIR, enter correct IP address and
repeat Step 1.
3.
Browse to the location of the .bin file for SocketServer.
4.
Select the Download button to start the update procedure.
5.
Select the Close button after the download has completed.
6.
Verify the new SocketServer version:
a.
Select the Reset button.
Note: There will be no screen change. If the DeviceMaster AIR is local,
watch the Ethernet LEDs to confirm that the DeviceMaster AIR did
reset.
b.
After the DeviceMaster AIR loads, select the Query button and confirm
that version numbers did change.