Comtrol DM AIR User Manual
Page 30
30 - DeviceMaster AIR User Guide: 2000365 Rev. C
Network Configuration for the Serial Portion
Using PortVision Plus to Configure the Network Settings
5.
Change the device network properties as required for your site.
•
If you want to run the device using the MAC addressing scheme, select
Disable IP.
•
To use the device with DHCP, select DHCP IP, and make sure that you
provide the MAC address of the device to the network administrator.
•
To program a static IP address, select Static IP and enter the appropriate
values for your site.
Note: If you need additional information about using this screen, open
the PortVision Plus help system. You can access the help system
using the Help button or go directly to the help for this property
page by select the Network Settings help option the Context menu
button (right),
6.
Optionally, select the Email Settings property page to configure email
notification services.
7.
Optionally, select the RFC1006 Settings property page to configure RFC1006
settings.
8.
Optionally, select the Port Settings property page to configure serial port
characteristics for socket services.
9.
Optionally, select Save Settings to a File to create a configuration file that you
can use to configure other DeviceMaster AIR units.
10. After entering the changes, select Apply Changes.
11. Close the Configure Device window.