Ad hoc mode – Comtrol DM AIR User Manual
Page 14
Advertising
14 - DeviceMaster AIR User Guide: 2000365 Rev. C
Hardware Installation and WLAN Configuration
Connecting the Hardware and Initial Configuration
Ad Hoc Mode
Use this
procedure to
configure the
DeviceMaster
AIR for Ad Hoc
mode.
a.
Select Ad-hoc
for the
Operating
Mode.
b.
Enter the
SSID.
c.
Enter the
Channel from
the drop list.
Remember,
all members
must use the
same channel
number.
Note: For a description of Ad Hoc mode, see the
14. Optionally, select Enabled, the appropriate values for the encryption method,
WEP Mode, keys, and select Next.
Encryption is disabled by default but it is recommended that you
enable encryption on all wireless devices to eliminate security
problems with the network.
Caution
Advertising