Comtrol DM AIR - Manual (Page 59)

Hardware Specifications and Compliance Notices DeviceMaster AIR User Guide: 2000365 Rev. C - 59
Factory Default Settings for the WLAN Port
Factory Default Settings for the WLAN Port
This table illustrates the DeviceMaster AIR
WLAN port defaults. You can reset the
DeviceMaster AIR to the factory defaults by
selecting the Reset button.
WLAN port modulation techniques
PBCC (22Mbps/8.5db)
PBCC (11Mbps/4.5db)
CCK (11Mbps/8.5db)
PBCC (5.5Mbps/1.5db)
CCK (5.5Mbps/5.5db)
Barker (2Mbps/3db)
Barker (1Mbps/0db)
WLAN port transmitter output
power
15dBm ± 2dB
WLAN port external antenna type
Detachable 1.0dB gain with reverse SMA
connector
WLAN port over-driving levels Tolerates up to +17dBm at the antenna
SNMP support Monitoring only.
Dimensions (without antenna) 4.57” x 5.5” x 1.94”
Weight (device, only; excluding
power supply)
15 oz
Item Specification
WLAN Port Default Setting
Operating Mode Infrastructure
SSID default
Channel 6
Transmission
rates
Auto
Encryption No
Administrator
password Blank (no password
needed)
IP address mode Static
IP address 192.168.0.30
Subnet mask 255.255.255.0
Username admin (all lower case)
Reset