Comtrol DM AIR - Manual (Page 28)

28 - DeviceMaster AIR User Guide: 2000365 Rev. C Network Configuration for the Serial Portion
Installing, Updating, and Removing PortVision Plus
Installing, Updating, and Removing PortVision Plus
You can install PortVision Plus from the Software and Documentation CD that
came with your product or download the latest version (
Locating Software and
Documentation on Page 8).
Note: PortVision Plus requires that you connect the DeviceMaster AIR to the same
network segment as the Microsoft system during the configuration process.
PortVision Plus
Installation Use this procedure to install PortVision Plus from a Software and Documentation
CD or download the latest from the internet.
1. Install from CD, use the menu system on the CD to start the installation or
browse to the appropriate CD drive and locate the \Dev_Mstr\PortVision_Plus
directory.
2. Execute the PVPlus.MSI file and follow the installation wizard.
3. Optionally, launch PortVision Plus from the last installation screen and allow
PortVision Plus to create shortcuts for the COM port utilities (Test Terminal
and Port Monitor).
4. Select the Scan button so that PortVision Plus locates the DeviceMaster AIR
units on the network.
See Using PortVision Plus to Configure the Network Settings on Page 29 to
program the DeviceMaster AIR network settings. For additional information
about PortVision Plus, see the help system.
Updating PortVision
Plus Use the following procedure to update PortVision Plus.
1. Download the latest version of PortVision Plus ( Locating Software and
Documentation on Page 6).
2. Execute the PVPlus.MSI file and follow the installation wizard.
PortVision Plus updates the application automatically using the installation
wizard.
Removing
PortVision Plus You can remove PortVision Plus by executing the PVPlus.msi installation file or by
using the Add/Remove control panel:
1. Open the Add or Remove control panel.
2. Highlight PortVision Plus and select the Remove button.
To fully remove PortVision Plus from your system, also remove the \Program
Files\Comtrol\PortVision_Plus directory.