Loading wireless configuration system settings – Comtrol DM AIR User Manual
Page 24
24 - DeviceMaster AIR User Guide: 2000365 Rev. C
Hardware Installation and WLAN Configuration
Loading Wireless Configuration System Settings
Loading Wireless Configuration System Settings
Use your web browser to access the Admin tab to load previously saved system
settings.
If you updated the wireless firmware and want to load the configuration settings
that you saved, make sure that the computer has an IP address within the same
range as the WLAN IP address of the DeviceMaster AIR. After updating the
wireless firmware, the DeviceMaster AIR is reset to the default IP address,
192.168.0.30.
1.
Open the web browser and enter the DeviceMaster AIR IP address.
2.
Select or type in user name in the User Name field.
3.
Enter the password, if a password was configured during initial installation.
4.
Select the Admin tab.
5.
Select Browse from the System Settings group, highlight the configuration file
you want to load, and select Open.
6.
Select Load from the System Settings group and Ok.
7.
Select Continue.