Using the reset button, Using a web browser, Using the reset button using a web browser – Comtrol DM AIR User Manual
Page 25
Hardware Installation and WLAN Configuration
DeviceMaster AIR User Guide: 2000365 Rev. C - 25
Restoring Default Wireless Configuration System Settings
Restoring Default Wireless Configuration System Settings
There are two ways to restore the default settings on the DeviceMaster AIR:
•
Reset button
•
Use a web browser and the Admin tab
Using the Reset
Button
Use the Reset Button between the antenna
and the power receptacle. Press the button
for a few moments to revert to the factory
default settings of the DeviceMaster AIR.
For a list of the defaults, see
Default Settings for the WLAN Port
Using a Web
Browser
Use your web browser to access the Admin tab to load previously saved system
settings.
1.
Open the web browser and enter the DeviceMaster AIR IP address.
2.
Select or type in user name in the User Name field.
3.
Enter the password, if a password was configured during initial installation.
4.
Select the Admin tab.
Reset