Clarion VRX653R - Manual (Page 14)

16
VRX653R
English
Owner
’s manual
Basic Operations
• If a title has been input, it is shown in the SUB
display. If no title has been input, “---------”
appears in the display. To input a title, refer to the
subsection “Entering titles” in “Other
Functions” section.
• For CD and TV, some special characters of the
title, the PS name of the RDS, and the DAB
service label will not be displayed on the
Information Panel of the DCP. In this case, those
characters will only be left blank.
• When CT data is not received, “CT--:--” appears
in the display.
Showing a mode display
When the panel is open:
Press the TITLE button ( to show the Title
List display. In the Title List display, the titles of
items stored in the PRESET buttons # 1 to 6
are listed.
∗ In the RDS tuner mode, a PS name is displayed.
∗ In the DAB mode, a service label is displayed.
∗ For detailed information, refer to the section
“Title list play”.
Opening and turning the display
Notes:
• Do not place any object on the open display.
• Do not drop any object on the movable part.
• Do not expose the display to shocks.
1. Press the OPEN button ! to open the
Color LCD display ¥.
∗ If the Color LCD display ¥ is left horizontally
in the open position for 10 seconds or longer,
it is automatically drawn in.
2. Turn the Color LCD display ¥ upwards to a
good view angle.
When the monitor is turned upwards, a
picture appears in the display. The
Information Panel 4 display disappears.
CAUTION
Do not turn the display unless it is
completely open.
When adjusting the angle of the display be
careful no to let your fingers get caught by
the panel or instrument panel of the vehicle.
3. To store the Color LCD display ¥ in the
source unit, turn it to the horizontal position
until a click is heard.
Turning on and off the monitor
Pressing the DISP button @ turns the monitor
on and off.
∗ When a button is pressed or during security
monitoring, the monitor-off mode is canceled.
Mute
Each time you press the MUTE button $, mute
is turned on and off.
“MUTE” appears when mute is turned on.
Setting the Z-enhancer
This unit comes with 3 types of sound tone effect
stored in memory. Select the one you prefer.
∗ The factory default setting is “Z-EHCR OFF”.
When a Z-enhancer comes on (1-3), “Z-EHCR”
appears in the display.
• “Z-EHCR 1” (Z-Enhancer 1):
Setting emphasizing bass.
• “Z-EHCR 2” (Z-Enhancer 2):
Setting emphasizing treble.
• “Z-EHCR 3” (Z-Enhancer 3):
Setting emphasizing bass and
treble.
• “Z-EHCR OFF” (Z-Enhancer off):
Neither bass nor treble are
emphasized by the Z-enhancer.