Clarion VRX653R - Manual (Page 37)

VRX653R
39
English
Owner
’s manual
Always turning on the button
illumination on the operation panel
Note:
• The following operation is enabled when the
panel is open.
The button illumination on the operation panel
when the display is turned upward, can be
switched between “ON” and “OFF”.
● “ON”: Button illumination on the operation
panel turns on for 5 seconds;
● “OFF” : Button illumination is always on
when the power is turned on;
∗ The factory default setting is “OFF”.
1. When the panel is open, press the ADJ
button * to show the adjustment selection
display.
2. Operate the JOYSTICK ¡ upward or
downward and select “AUTO ILL” to show
“ON” and “OFF” in the menu bar.
3. Operate the JOYSTICK ¡ rightward or
leftward to select either position to be set
and press the ENT at the center of the
JOYSTICK ¡ for setting.
4. Press the ADJ button * to return to the
previous mode.
∗ To set “ON” again, switch “OFF” to “ON”
manually.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for TV stations and CD
changer. The numbers of titles that can be
entered for each mode are as follows.
∗ You cannot enter titles with the unit in Seek,
Preset Scan, Auto store (TV), Scan, Repeat or
Random (CD changer) mode. Cancel each of
those operations before entering titles.
1. Press the FNC button 1 to select the mode
you want to enter a title (CD changer or
TV).
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
Mode Number of titles
TV mode 15 titles
CD changer mode Number of titles
DCZ628 connected 100 titles
CDC655z connected 60 titles
CDC655Tz connected 100 titles
CDC1255z connected 50 titles
Other Functions
3. If you press and hold the TITLE button (
for 1 second or longer, the display switches
to the title input mode display.
4. Operate the JOYSTICK ¡ upward or
downward, rightward or leftward and move the
cursor to the character to be entered. Press
the ENT at the center of the JOYSTICK ¡.
∗ When the cursor is at the lower/upper limit of
the display, operate the JOYSTICK ¡ upward
or downward, the character string of the
following line appears.
“-->” :
Space
“<--” : Backspace
“--I--” : Centering
5. Repeat the step 4 to enter the complete title.
6. Press and hold the ENT at the center of the
JOYSTICK ¡ for 2 seconds or longer to store
the title into memory and cancel title input mode.
Title list play
You can display a list of titles, then select the disc
or broadcast station to listen to from that list.
∗ You can not display a title list with the unit in
Seek, Preset Scan, Auto store (Tuner, TV or
DAB), Scan, Repeat or Random (CD changer)
mode. Cancel those operation modes before to
display a title list.
1. With the unit in radio, CD changer, TV or
DAB mode, press the TITLE button (. A
title list is displayed. The following functions
can be carried out in a title list display.
● TUNER: PS name (for RDS) of
frequency stored in the presets 1 to 6 or
frequency is displayed;
● DAB: Service label of a channel stored in
the presets 1 to 6 is displayed. When there is
not any service label, “---------” is displayed.
● CD changer: DISC titles for discs 1 to 6
are displayed (By changing over a display
page in case of 12-CD changer, disc 7 to 12
can be displayed). When there is not any
disc in a changer, ”---------” is displayed.
● TV: A title of a channel stored in the presets
1 to 6 or a channel number is displayed.
2. Operate the JOYSTICK ¡ upward or
downward to select one of the items 1 to 6.
Press ENT at the center of the JOYSTICK
¡ to reproduce the selected broadcast
station or disc.
∗ In case of 12-CD changer, move the cursor
to disc 6 and then operate the JOYSTICK ¡
downward to change over to a list display of
discs 7 to 12.