Clarion VRX653R - Manual (Page 19)

VRX653R
21
English
Owner
’s manual
TA (Traffic Announcement)
In TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also possible.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the TA button 0 when only “TP” is
lit in the display, “TP” and “TA” light in the
display and the unit is set into TA standby
mode until a traffic announcement is
broadcast. When a traffic announcement
broadcast starts, “TRA INFO” appears in the
display. If you press the TA button 0 while a
traffic announcement broadcast is being
received, the traffic announcement broadcast
reception is cancelled and the unit goes into TA
standby mode.
● Cancelling TA standby mode
With “TP” and “TA” are lit in the display, press
the TA button 0. The “TA” in the display goes
off and TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the TA button 0
searches for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press the TA button
0, “TA” lights in the display and the unit
automatically searches a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing the TA button 0
again makes the “TA” indicator go off and stops
TP station searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP that
can be received is less than 6, broadcast
stations already stored in memory are left
without being overwritten.
1. With “TA” lit in the display, press the PS/AS
button 5 for 2 seconds or more.
2. The TP stations with the good reception
condition are stored into preset memory.
∗ Even if you select FM1 or FM2, a TP station
is stored into memory for FM3.
PTY
This function enables you to listen to a
broadcast of the selected programme type
when it starts, even if the unit operates on a
function mode other than radio.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ Some countries do not yet have PTY broadcast.
∗ In TA standby mode, a TP station has priority
over a PTY broadcast station.
Selecting PTY
1. When you press the PTY button 8, the unit
goes into PTY select mode.
2. Press any one of the PRESET buttons # to
select a desired PTY. Alternatively, when the
panel is closed, operate the SEARCH
button 2 upward or downward to select a
desired PTY.
∗ Below are the factory default settings stored
for the PRESET buttons #.
3. The PTY select mode is cancelled automatically
7 seconds after a PTY is selected.
● Cancelling PTY standby mode
When you press the PTY button 8 for 1
second or longer, the indicator “PTY” goes off
and PTY standby mode is cancelled.
● Cancelling a PTY interrupt broadcast
Press the PTY button 8, during the PTY
interrupt broadcast to display the subsidiary,
the PTY interrupt is cancelled and the unit
returns to PTY standby mode.
PTY seek
1. Press the PTY button 8, the PTY select
mode is turned on.
2. Select a desired PTY.
3. Press the right or left side of the SEARCH
button 2. If you press the right side, the
unit seeks a PTY broadcast moving up the
frequencies; if you press the left side, it
seeks moving down the frequencies.
PTY item
ENGLISH Contents
1 NEWS News
2 INFO Information
3 POP M Pop music
4 SPORT Sports
5 CLASSICS Classics
6 M,O,R,M Middle of the road music
Preset
number
RDS Operations