Clarion VRX653R - Manual (Page 49)

VRX653R
51
English
Installation and Wire
connection manual
■ Connecting the Accessories
•
Connection to the CCD camera for vehicle
The CCD CAMERA for vehicle can be connected to the system expansion terminal on the main
unit. For detailed information, refer to the instruction sheet or manual for the CCD CAMERA.
Notes:
• A power supply box (sold separately) is required for connection of the main unit and the CCD
CAMERA.
• While the CCD CAMERA is used, the navigation cannot be turned on.
• The power supply box for camera CCA-147 cannot be used. Please use The CCA-188 instead.
•
Connection to car navigation equipment
When Clarion car navigation equipment is used, connect it to the system expansion terminal
(CCD/NAVI) and the RGB terminal of the main unit. For detailed information, refer to the
operating instructions provided with car navigation equipment. When the NAVI is connected, the
CCD camera cannot be connected. When the Clarion NAVI is to be connected, set the INPUT to
the NAVI position.
•
If the specified lead of the cellular phone is connected to the phone mute
lead of the source unit, the audio mute is available when the cellular
telephone is used.
For audio mute setting in cellular telephone use, see page 40.
•
DAB (Digital Audio Broadcasting)
When the DAB is to be connected, use the Ce NET connector. For detailed information, refer to
the instruction manual of the DAB.
For DAB connection, the DAH9500Z cannot be connected.
•
TV Tunner
When the TV TUNER is to be connected, connect the Ce NET connector and RCA PIN (yellow).
For detailed information, refer to the instruction manual of the TV TUNER.
■ Connecting the parking brake lead
Connect the lead to parking brake lamp earth
in the meter panel.
Notes:
• Connecting the parking brake lead to lamp earth
allows you to watch TV/VTR/DVD changer when
the parking brake is engaged.
• When the parking brake lead is not connected,
the monitor will stay off.
Parking brake
Parking brake lamp
+ lead to battery
Connect these three leads.
- cord
parking
brake signal
lead
Parking brake lead
(bright green)