Clarion VRX653R - Manual (Page 17)

VRX653R
19
English
Owner
’s manual
Radio Operations
∗ When local seeking starts, “LO SEEK”
appears in the display.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the BND button % and select the
desired band. (FM or AM (MW/LW))
∗ If “MANU” is not lit in the display (or when
the panel is closed, if the indicator “SRCH” is
lit), press and hold the BND button % for 1
second or longer. “MANU” appears in the
display (or when the panel is closed, the
indicator “SRCH” goes off) and manual
tuning is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the right or left side of the
SEARCH button 2 for 1 second or longer
to tune in a station.
● Step tuning:
Press the right or left side of the SEARCH
button 2 to manually tune in a station.
Note:
• Manual tuning is cancelled if you do not
operate the unit for 7 seconds or longer.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the
corresponding PRESET button # recalls the
stored radio frequency automatically.
1. Press the BND button % and select the
desired band. (FM or AM (MW/LW))
2. Press the corresponding PRESET button #
to recall the stored station.
∗ Press and hold one of the PRESET buttons
# for 2 seconds or longer to store that
station into preset memory.
Manual memory
1. Press the BND button % and select the
desired band. (FM or AM (MW/LW))
2. Select the desired station with seek tuning,
manual tuning, or preset tuning.
3. Press and hold one of the PRESET buttons
# for 2 seconds or longer to store the
current station into preset memory.
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Press the BND button % and select the
desired band. (FM or AM (MW/LW))
2. Press and hold the PS/AS button 5 for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
∗ If auto store is performed in the FM bands,
the stations are stored in FM3 even if FM1 or
FM2 was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for desired station in memory.
1. Press the PS/AS button 5.
2. When the desired station is tuned in, press
the PS/AS button 5 again to continue
receiving that station.