Clarion VRX653R - Manual (Page 44)

46
VRX653R
English
Installation and Wire
connection manual
1. Do not open the case. There are no user
serviceable parts inside. If you drop
anything into the unit during installation,
consult your dealer or an authorized
CLARION service centre. 2. Use a soft, dry cloth to clean the case.
Never use a rough cloth, thinner, benzine,
or alcohol, etc. For tough dirt, apply a little
cold or warm water to a soft cloth and wipe
off the dirt gently.
1. Prepare all articles necessary for installing
the main unit before starting.
2. This model is used with the LCD panel slid
forwards (shell loading system). On some
types of cars, the LCD panel may touch the
dashboard or shift lever, in which case it
cannot be installed. Check that the set will
not hamper operation of the shift lever
before choosing the place of
installation.(Figure 2)
3. Install the unit within 30° of the horizontal
plane. (Figure 3)
4. If you have to do any work on the car body,
such as drilling holes, consult your car
dealer beforehand.
5. Use the enclosed screws for installation.
Using other screws can cause damage.
(Figure 4)
3.
GENERAL CAUTIONS
4.
CAUTIONS ON INSTALLATION
T
N N T
N T
6. The source unit has mounting screw holes
for NISSAN (N marks) and TOYOTA (T
marks) vehicles.