Clarion VRX653R - Manual (Page 34)

36
VRX653R
English
Owner
’s manual
Dynamic Label Function
A dynamic label (hereinafter referred to as
“DLS”) is a text data associated with each DAB
service. This set can display DLS up to 128
characters in a display.
∗ This function is enabled only when the panel is
open.
DLS display mode
Press the TITLE button ( for 1 second or
longer to place in the DLS display mode. To
cancel the DLS mode and return to the
previous display, press the TITLE button (
again. If there is a DLS data in the reception
service, DLS text is displayed in the text
displaying area.
A mark “ Δ appears at the head of a whole
text sentence (page), and a RETURN mark is
indicated at the end point.
DLS memory
Up to six DLS, currently being received, can be
stored. By pressing the PRESET button # 1 to
6 for 2 seconds or longer, the DLS page
currently being displayed is stored. Operating
the JOYSTICK ¡ rightward or leftward moves
a cursor to either P1 through P6, and pressing
the ENT at the center of the JOYSTICK ¡ for
2 seconds stores it.
DLS Calling
To call the DLS stored in the DLS memory,
press the PRESET button #. The DLS in the
DLS memory is displayed by 16 characters (2
lines) at the intervals of 5 seconds (automatic
calling). To display at shorter intervals, press
the PRESET button # while waiting for
successive DLS character string to be
displayed, the following DLS character string is
displayed (manual calling).
With the DLS memory being called, move the
cursor to “UPDATE” and press the ENT at the
center of the JOYSTICK ¡. The display is
changed into the DLS display being received.
Digital Radio/DAB Operations
3. When “PTY ITEM” is selected, PTY
selection is carried out. Operate the
JOYSTICK ¡ upward or downward to
select a desired PTY. Press the ENT at the
center of the JOYSTICK ¡ to set the
selected PTY ITEM.
(The PTY ITEM thus set is listed at the
lower right of the display.)
4. When “PRESET” is selected, PTY preset
memory can be called for and stored.
5. Operate the JOYSTICK ¡ upward or
downward to select Preset Nos.1 to 6.
6. Press the ENT at the center of the
JOYSTICK ¡ to call for the preset PTY
ITEM.
Press the ENT at the center of the
JOYSTICK ¡ for 2 seconds to store the
PTY ITEM currently selected to any Preset
No. selected (listed at the lower right).
7. After adjustment is finished, operate the
JOYSTICK ¡ rightward or leftward to move
the cursor to “MENU”, and press the ENT at
the center of the JOYSTICK ¡ to return to
STANDARD display.
Emergency broadcast
If an emergency broadcast is received, all the
function mode operations are stopped.
“ALARM” appears in the display and the
emergency broadcast can be heard.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
● Cancelling an emergency broadcast
If you press the AF Button 7, emergency
broadcast reception is cancelled.
Volume setting of TA, emergency
broadcast (ALARM), information
and PTY
The volume for TA, ALARM, information and
PTY interrupts can be set during TA, ALARM or
PTY interrupts.
∗ The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, operate
the VOLUME button 2 upward or downward to
set the volume to the desired level (00 to 33).
∗ When the TA, ALARM, information or PTY
interrupt ends, the volume returns to the level it
had before the interrupt.