Clarion VRX653R - Manual (Page 21)

VRX653R
23
English
Owner
’s manual
CD Changer Operations
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers (DVD and CD).
Press the FNC button 1 and select the CD
changer mode to start play. If 2 CD changers
are connected, press the FNC button 1 to
select the CD changer for play.
∗ If “NO MAG” appears in the display, insert the
magazine into the CD changer. “LOADING”
appears in the display while the player loads
(checks) the magazine.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
1. Press the PLAY/PAUSE button 3 to pause
play. “PAUSE” appears in the display.
2. To resume play, press the PLAY/PAUSE
button 3 again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
Each time you press and hold the DISP button
@ for 1 second or longer, the title display
changes in the following order.
When the panel is closed:
User title (disc)
➜ CD-text title (disc) ➜ CD-
text title (track)
➜ User title (disc)...
When the panel is open:
User title (disc)
➜ CD-text title (disc & track) ➜
User title (disc)...
Note:
• If the CD playing is not a CD-text CD or no user
title has been input, “----------” appears in the
display.
● Scrolling a CD-text title
When a CD-text title is longer than 16
characters (8 characters when the panel is
closed), you can scroll the display as follows.
Switching the PTY display language
Note:
• This function is enabled only when the panel is
open.
You can select one of 4 languages (English,
German, Swedish or French) for the PTY
displayed in the display.
∗ The factory default setting is “GB” (English).
1. Press the ADJ button * to show the
adjustment selection display.
2. Operate the JOYSTICK ¡ upward or
downward to select "PTY LANG". After that,
select a desired language by operating the
JOYSTICK ¡ rightward or leftward and
then press the ENT at the center of the
JOYSTICK ¡ to change the setting.
“GB”: English
“F”: French
“D”: German
“S”: Swedish
3. Press the ADJ button *. The unit returns to
the previous mode.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗ The factory default setting is “15”.
During a TA, ALARM or PTY interrupt,
operate the VOLUME button 2 upward or
downward to set the volume to the desired
level (00 to 33).
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the
interrupt.
RDS Operations