Clarion VRX653R - Manual (Page 32)

34
VRX653R
English
Owner
’s manual
Digital Radio/DAB Operations
Information select
This function allows selecting a type of
INFORMATION on INFORMATION interrupt
mode. You can set any of the 6 types of INFO
below:
TRAFFIC, WARNING, NEWS INFO,
WEATHER, EVENTS, SP. EVENT
∗ This function is enabled only when the panel is
open.
1. Press the ADJ button *.
2. Operate the JOYSTICK ¡ upward or
downward to select “INFO SEL”. Press the
ENT at the center of the JOYSTICK ¡ to
change into the INFO selecting display.
3. Operate the JOYSTICK ¡ upward or
downward to select a desired
INFORMATION. “ON” and “OFF” items are
displayed to the right.
4. Operate the JOYSTICK ¡ rightward or
leftward to select “ON” and press the ENT at
the center of the JOYSTICK ¡ to set it.
5. When the setting is finished, operate the
JOYSTICK ¡ rightward or leftward to move
the cursor to the “MENU”. Then press the
ENT at the center of the JOYSTICK ¡ to
return to the adjustment display.
PTY
This function enables you to listen to the
selected programmes type, irrespective of the
function mode.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ DAB and RDS have the same PTY.
∗ You can select one PTY from DAB or RDS.
∗ PTY broadcast are not yet available in all
countries.
∗ In INFO standby mode, INFO stations have
priority over PTY stations.
∗ In TA standby mode, TP stations have priority
over PTY broadcasting station.
Selecting PTY
1. When you press the PTY button 8, the unit
goes into PTY select mode.
2. Press any one of the PRESET buttons # to
select the desired PTY. Alternatively, when
the panel is closed, operate the SEARCH
button 2 upward or downward to select a
desired PTY.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the TA button 0 when only “TP” is
lit in the display, “TP” and “TA” light in the
display and the unit is set into TA standby
mode until a traffic announcement is
broadcast. When a traffic announcement
broadcast starts, “TRA INFO” appears in the
display. If you press the TA button 0 while a
traffic announcement broadcast is being
received, the traffic announcement broadcast
reception is cancelled and the unit goes into TA
standby mode.
● Cancelling TA standby mode
With “TP” and “TA” lit in the display, press the
TA button 0. The “TA” indicator in the display
goes off and TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the TA button 0
searches for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press the TA button
0, the “TA” in the display lights and the unit
automatically searches a TP station.
Information standby mode
When the INFORMATION programme selected
in the “INFO SEL” display of the adjustment
mode starts, the unit switches to the selected
INFORMATION programme automatically.
∗ For details on “Information select”, refer to the
procedure below.
1. Press the TA button 0, for 1 second or
longer, “INFO” lights in the display and the
unit is set to INFORMATION standby mode
until INFORMATION starts.
* If you press the TA button 0 while the
INFORMATION programme is being
broadcast, the programme broadcast is
cancelled and the unit enters INFORMATION
standby mode.
2. To cancel INFORMATION standby mode,
press the TA button 0 again for 1 second
or longer.
Note:
• Only in case of DAB connection, this can be
operated even in the RDS tuner mode.