Clarion VRX653R - Manual (Page 29)

VRX653R
31
English
Owner
’s manual
Setting the TV area
∗ This function is enabled only when the panel is
open.
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the ADJ button * to switch to the
adjustment selection display.
2. Operate the JOYSTICK ¡ upward or
downward to move the cursor to “TV AREA”
and press the ENT at the center of the
JOYSTICK ¡ to display a list of country
name.
3. Operate the JOYSTICK ¡ upward or
downward to select a desired country. Then
press the ENT at the center of the
JOYSTICK ¡ to set it.
4. When the setting is finished, operate the
JOYSTICK ¡ rightward or leftward to
move the cursor “MENU”. Then press the
ENT at the center of the JOYSTICK ¡ to
return to the adjustment selection display.
Setting the TV diver
∗ This function is enabled only when the panel is
open.
∗ Normally use the TV diver with the “ON”
position.
You can change the reception setting for the
TV antenna connected to the TV tuner.
1. Press the ADJ button * to switch to the
adjustment selection display.
2. Operate the JOYSTICK ¡ upward or
downward to select “TV DIVER”.
3. Operate the JOYSTICK ¡ rightward or
leftward to select “ON” or “OFF” and press
the ENT at the center of the JOYSTICK ¡
to set the selected reception setting.
● ON:
Sets reception emphasizing the visual.
● OFF:
Sets the diver setting to OFF.
4. Press the ADJ button * to return to the
previous mode.
TV Operations
Adjusting the brightness and tone
of color
Notes:
• This operation is available only when the car is
stopped and the parking brake is applied.
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
1. Press the BND button % to switch to the
adjustment selection display.
2. Operate the JOYSTICK ¡ upward or
downward to select the option “MONI ADJ”
(by moving the cursor).
3. Press the ENT at the center of the
JOYSTICK ¡.
4. Operate the JOYSTICK ¡ rightward or
leftward to select “BRIGHT”,“COLOR” or
“HUE” (by moving the cursor).
● “BRIGHT“:
Adjust the brightness of the display.
● “COLOR“:
Adjusts the color saturation.
● “HUE“:
Adjusts the tone of color (red is emphasized
or green is emphasized.)
5. Operate the JOYSTICK ¡ upward or
downward to adjust a level.
6. When the adjustment is made, operate the
JOYSTICK ¡ rightward or leftward to move
the cursor to “MENU”. Then press the ENT
at the center of the JOYSTICK ¡ to return
to the adjustment selection display.