Futaba 4PKS-R 2.4GHz - Manual (Page 132)

132
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
Throttle ATL Function "ATL"
Operation
7KHWKURWWOHEUDNHVLGH ZKHQWKHWKURWWOHLVSXVKHGIRUZDUG 
EUDNHDPRXQWFDQEHDGMXVWHG
Setup Item
RATE :Brake amount
1
(Brake amount adjustment)
Use the (+) and (-) buttons to adjust the brake amount.
Adjust the - side when the braking effect is strong and the + side when the
braking effect is weak.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
ATL function adjustment
Throttle ATL Function "ATL" (Throttle system)
7KLVIXQFWLRQGHFUHDVHVWKHVHWYDOXHZKHQWKHEUDNLQJHIIHFWLVVWURQJDQGLQFUHDVHVWKH
VHWYDOXHZKHQWKHEUDNLQJHIIHFWLVZHDN
7KLV IXQFWLRQ LV OLQNHG WR WUDQVPLWWHU JULS GLDO '/ :KHQ '/ LV DVVLJQHG DQRWKHU
function, this function can be set with this screen.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Brake amount (RATE)
0~100%
Initial value: 100%