Rake, Fu n c tio n – Futaba 4PKS-R 2.4GHz User Manual

Page 74

Advertising
background image

3CH

3CH

4CH

2CH

2CH

or

4CH

74

Fu
n

c

tio

n

"RAKE

(Throttle, 3rd channel system)

This function is used when the front and rear brakes must be adjusted independently
such as a 1/5 scale GP car. This mixing uses the 2nd CH for the rear brakes and the 3rd
or 4th CH for the front brakes, or controls the front brakes with the 3rd CH and 4th CH
servos, or controls the 2nd CH by independent throttle and controls the rear and front
brakes with the 3rd CH and 4th CH. In addition, mixing which varies the 3rd CH and
4th CH brake rate in proportion to steering operation is also possible.

-When braking, mixing is applied to 2nd CH 3rd CH, 4th CH.

-3rd CH and 4th CH brake amount, 2nd CH, 3rd CH, and 4th CH brake delay, and 3rd
CH and 4th CH brake EXP and ABS can be set.

-Steering mixing which varies front brakes 3rd CH and 4th CH matched to the steering
operation can be set. Front brakes 3rd CH and 4th CH can be individually weakened
according to the steering left or right operation amount.

Operation

Front Brake

Rear Brake

It is possible to adjust the Brake Return Amount (ABP), Delay Amount (DLY) and
Cycle period (CYC) exclusively for the front brake (the 3rd or 4th CH). In doing so,
you can use the A.B.S. Function at the front side even if the A.B.S Function is off for
the rear brake (2nd CH). You can use the same procedure as the 2nd CH A.B.S Func-
tion for setting the Cycle Period (CYC), Duty Ratio (DTY) and Steering Mixing (STM).
Use PS1, PS2, PS3 to switch the 3rd and 4th channel A.B.S. function ON/OFF.

3rd, 4th chnnels A.B.S.

"RAKE

When "CUT OFF", which prohibits trigger brake side operation, was set in the boat
mode (p.78), the brake mixing function will not actually operate even if set.

When

TRG-BRK was set to CUT OFF by boat mode function

When "4WS MIX" (p.88) or "GYRO MIX" (p.92) was set to ON by special mixing the
3rd CH of this brake mixing function cannot be used and when "DUAL ESC" (p.90) or
"CPS MIX" (p.94) was set to ON, 4th CH brake cannot be used.

Setting Special mixings

Advertising