4hrottle, Fu n c tio n, Throttle system) – Futaba 4PKS-R 2.4GHz User Manual

Page 80

Advertising
background image

5 : 5

7 : 3

Warning display

80

Fu
n

c

tio

n

(Opening Screen)

MENU 1

Press t

he

button

Calling the setup screen

(Opening Screen)

MENU 2

DIRECT SEL

*Calling from menu screen

Press the button set
at this function.

MENU1/2 selection
by

button

Menu screen call
by

button

Select the function
by

button

Press t

he

button

* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:

s3ELECT

button

* b l i n k s a t t h e c u r r e n t

SETUP

-The neutral brake function is a function switch function (p.96), and setting the neutral
brake function ON/OFF switch is necessary.

Neutral brake, which applies the brakes at the throttle trigger neutral position, can be set.
However, for Futaba speed controller (ESC) MC960CR, MC950CR, MC851C, MC602C,
0&&5HWFFRQVLGHULQJVDIHW\ZKHQWKHQHXWUDOSRVLWLRQLVQRWFRQ¿UPHGWKHVHW
will not enter the operation mode to prevent the motor from rotating instantly when
the power is turned on. When using the MC960CR, MC950CR, MC851C, MC602C,
MC402CR, etc., check that the ESC is in the neutral position and set the neutral brake
function switch to ON after the set enters the operation mode.

An LED blinks while the neutral brake function is active (when LED is enabled). In
addition,

appears on the initial screen and menu screen.

Operation display

If the power switch is tur ned on
while the neutral brake switch is
on, an audible alarm will be heard.
Immediately set the neutral brake
switch to OFF.

F50/B50

F70/B30

4HROTTLE

-This function allows selection of the forward side and brake (reverse) side operation ra-
tio from 70:30 or 50:50 by changing the neutral position of the throttle servo.

When "CUT OFF", which provides trigger brake side operation in the boat mode (p.78),
is set, the neutral brake function cannot be used because brake operation is stopped. In
addition, the neutral position does not change even though the throttle mode is changed.

When "TRG-BRK" was set to "CUT OFF" by boat mode function

Setup items
.4 "2+

&ORWARD

"RAKE

4HROTTLE

(Throttle system)

&ORWARD

"RAKE

Advertising