Futaba 4PKS-R 2.4GHz - Manual (Page 139)

139
Reference
Power off forgotten warning
If the T4PKSR is not operated for 10 minutes, an audible alarm is sounded and "WARN-
ING" is displayed on the screen. The audible alarm stops when the steering wheel,
throttle trigger, and any dial, switch, or edit button is operated. If you are not going to
use the transmitter, turn the power off. (Setting can be reset at the system menu on page
122.)
Audible alarm:
Tone sounds (7 times) and stops (repeated) LCD screen:
MIX Warning
When the power switch is turned on while the idle-up, preset (engine cut) or neutral
brake function switch is on, an audible alarm will sound and "MIX WARNING" will be
displayed on the LCD. When that function switch is turned off, the alarm will stop.
LCD screen: Audible alarm:
Tone sounds (7 times) and stops (repeated)
High voltage alarm
If a battery exceeding 8V is used with the T4PKSR, an audible alarm will sound and
"HIGH VOLTAGE" will be displayed on the LCD screen.
Immediately remove the battery because it may cause the T4PKSR to malfunction.
LCD screen: Audible alarm:
Tone sounds (7 times) and stops (repeated)
Memory Error
If the data in the transmitter is not transferred normally when the power is turned on, an
audible alarm will sound and "ACCESS ERROR" will be displayed on the LCD.
- To stop the alarm, turn off the power.
- Turn the power back on. If the alarm is not generated again, there is no problem.
LCD screen: Audible alarm:
Tone sounds (7 times) and stops (repeated)