Futaba 4PKS-R 2.4GHz - Manual (Page 66)

Warning display
66
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
SETUP
4IRES
7HEELS
Without Start function
With Start function
Start Function Operation
- When the throttle trigger is moved to the preset position (trigger position: TG.P), the
throttle servo moves to the preset position.
- When the throttle trigger is operated slowly so that the wheels will not spin, the car
automatically accelerates to the set speed.
7KLVIXQFWLRQLVHIIHFWLYHRQO\IRUWKH¿UVWWKURWWOHWULJJHURSHUDWLRQDWVWDUWLQJ7KLV
function has to be activated before every start.
- When the throttle trigger is returned slightly, the Start function is automatically deac-
tivated and the set returns to normal throttle trigger operation.
3TART
Function selection
First, select the function at
THE
!437
%NGINE
3TART
(Throttle system)
If the track is slippery and you begin to accelerate by pushing the trigger to full throttle,
the car wheels will spin and the car will not accelerate smoothly. When the Start func-
tion is activated, merely operating the throttle trigger slowly causes the throttle servo to
automatically switch from the set throttle position to a preset point so that the tires do
not lose their grip and the car accelerates smoothly.
When the switch is pressed, the throttle servo will move to the preset position without
regard to the throttle trigger position. This is convenient when used to cut the engine of
boats, etc. (The function select switch function. See page 96)
Engine Cut Function
If the power switch is turned on while
the preset (engine cut) switch is on, an
audible alarm will be heard. Immedi-
ately set the preset switch to OFF.