Futaba 9CPS - Manual (Page 20)

20
AIRCRAFT (ACRO) MENU FUNCTIONS
Please note that all BASIC menu functions are the same for airplanes (ACRO), sailplanes (GLID1FLAP/2FLAP/2FL-C), and
helicopters (HELISWH1/SWH2/SWH4/SR-3/SN-3/SR-3s). The glider BASIC menu does not include IDLE-DOWN or THR-CUT;
the helicopter BASIC menu includes additional features (swashplate adjustment and throttle/pitch curves and revo for
Normal flight mode) that are discussed in the Helicopter section.
Map of ACRO BASIC functions ....................................... 21
Quick Guide to Setting up a 4-channel Airplane ....... 22
ACRO BASIC MENU FUNCTIONS ............................... 25
MODEL Submenu: MODEL SELECT, COPY and NAME . 25
PARAMETER Submenu: TYPE, MODUL, ATL, AIL2,
& RESET ..................................................................... 28
Servo REVERSE .......................................................... 31
END POINT ................................................................. 32
Idle Management: IDLE DOWN and THR-CUT ............ 33
Dual/Triple Rates and Exponential (D/R,EXP) ........... 35
TIMER Submenu ......................................................... 38
Auxiliary Channel assignments and
CH9 reverse (AUX-CH) ............................................... 39
TRAINER ..................................................................... 40
TRIM and SUB-TRIM ................................................... 41
SERVO Display ........................................................... 42
Fail Safe and Battery FailSafe (F/S) .......................... 43
ACRO ADVANCE MENU FUNCTIONS .......................... 44
Wing types ................................................................. 44
FLAPERON .............................................................. 45
FLAP TRIM ............................................................. 46
Aileron Differential (AIL-DIFF) .............................. 47
Using a 5-channel receiver: AIL-2 ......................... 48
ELEVON (see tail types) .......................................... 49
Tail types ................................................................... 49
ELEVON .................................................................. 49
Twin Elevator Servos (AILEVATOR) ....................... 50
V-TAIL ..................................................................... 51
SNAP ROLL ................................................................. 52
Mixes: definitions and types ...................................... 54
ELEV-FLAP .............................................................. 55
AIRBRAKE/BUTTERFLY (crow) ............................... 56
Airbrake switch selection (SW SELECT) ................ 56
THROTTLE-NEEDLE ................................................. 58
THROTTLE DELAY ................................................... 59
Linear, Prog. mixes 1-5 ......................................... 60
Curve, Prog. mixes 6-7 .......................................... 63
GYA gyro mixing (GYRO SENS) ............................ 65
Other Equipment ....................................................... 66