Futaba 9CPS - Manual (Page 85)

85
Swash to Throttle Mixing (SWASH-THR):
This function can be set for each flight condition, and is used to correct the tendency
of the model to change altitude when the rotor is tilted by aileron, elevator, and
other controls.
Adjustability:
• Mixing may be set from 0 to 100% each flight condition.
GOAL of EXAMPLE: STEPS: INPUTS:
Correct the tendency of the model to
change altitude.
Where next?
Close the menu.
to 10%.
Open SWASH-THR function.
HI/LOW-PIT : see p. 94.
GOVERNOR set up: see p. 97.
for 1 second.
(If ADVANCE, again.)
to SWASH-THR.
Activate the function.
Ajust the rate.
(Ex: IDL1 10%)
to ON.