Panic alarms, Fire panic, Police panic alarm – Interlogix Concord Express User Manual User Manual

Page 27: Auxiliary panic alarm

Advertising
background image

Concord Express User Instructions

21

Rapid Beeps

Panic Alarms

Panic alarms are easily activated from any touchpad to quickly alert the central
monitoring station to a Fire, Police, or Auxiliary emergency. A panic alarm can be
activated at any time, regardless of the current arming level: 1—OFF, 2—STAY,
or 3—AWAY.

This system is designed to inform a central monitoring station of the nature of the
emergency so the correct personnel can be dispatched immediately.

Fire Panic

The Fire panic alarm sounds from all interior and exterior sirens. On monitored
systems, the central monitoring station responds by calling the fire department.

To activate a Fire panic alarm from a touchpad:

Press and hold both Fire buttons for 2 seconds.

Police Panic Alarm

The Police panic alarm sounds from all interior and exterior sirens, scaring off
any intruder and alerting neighbors to the trouble. On monitored systems, the
central monitoring station responds by calling the police.

To activate a Police panic alarm using a touchpad:

Press and hold the Police button(s) for 2 seconds.

To activate a Police panic alarm from a keychain touchpad*:

Press and hold the Lock and Unlock buttons at the same time for 2 seconds.

* The installer must configure the Police panic alarm to work this way.

Auxiliary Panic Alarm

The Auxiliary panic alarm sounds from interior sirens only. It is typically set up by
your security dealer, based on your specific needs. On monitored systems, the
central station responds by calling the service or agency you specified through
your dealer.

Advertising