Interlogix Concord Express User Manual - Manual (Page 35)

Concord Express User Instructions 29
Although all three types of information can be reported on your pager, your pager
service determines how the information will actually appear.
Event Code in Page
This part of the page let’s you know what has happened.
Table 1: Event codes
Code Indicates
009 A sensor has been restored to its non-alarm state
111 System has been disarmed
118 System trouble has been fixed
119 System alarm condition has been cancelled
222 System armed to Level 2
333 System armed to Level 3
1
555 System phone test
888 System has a trouble condition
999 System is in alarm condition
1
If the user arms the system to level 3 (AWAY) the pager will report that the system was armed
to level 3 (333). However, if the Auto Stay Arming feature is enabled and the user does not exit
the premises, the arming level will revert to level 2 (STAY) without notifying the pager.
Sensor Number or User Number in Page
This part of the page let’s you know who or what is causing the event.
Table 2: Sensor or user number
Code Indicates
000 System event not caused by a sensor or user
001 - 024 Sensor numbers 1 through 24
600 - 615 User codes 00 through 15 used
678 System Master code used
679 Installer code used
680 Dealer code used
697 Quick Arm used