Interlogix Concord Express User Manual - Manual (Page 37)

Concord Express User Instructions 31
See “Notification by Pager” on page 28 for more information on paging reports.
Latchkey Paging
The Latchkey paging feature allows up to three users (with pagers) to be notified
when the system is disarmed. Latchkey pages do not report to the central station.
This feature is useful when you’re at work and would like to be notified when your
daughter or son arrives home and disarms the system.
The Latchkey paging feature can be enabled only by the installer. Only Latchkey-
designated user codes can cause a Latchkey page to be sent. By default, this
includes the first 5 Regular User codes. If you’d like more user codes to be
included, contact your installer.
Preparing the system to send a Latchkey page:
Arm the system, then press 6. Touchpads display briefly: “Pager on,” or
“LATCHKEY PAGER ON.”
To send a Latchkey page:
Latchkey-designated user disarms the system.
Users with pagers will receive a message containing 111 and the user code
entered to disarm the system.
Note
: If you have the Opening and Closing Reports feature turned on, you’ll
receive a page every time someone disarms the feature, not just Latchkey-
designated user codes.
No Activity Feature
The system can monitor the activity in your home and automatically call for help if
normal activities are not detected within a defined period of time.
Note
: This feature is not active in Level 3—AWAY.
For example, if someone falls and can’t move, the system will detect that normal
activities, such as opening doors and windows, have not occurred for a
predetermined. No Activity time.
The system sounds an auxiliary alarm to let you know there may be a problem. If
all is well, you can stop the siren by disarming your system. If no one disarms the
system for 5 minutes, your system calls the central monitoring station. The
central monitoring station will send emergency personnel to the premises to
check out the situation.