Interlogix Concord Express User Manual - Manual (Page 36)

30 Concord Express User Instructions
698 Keyswitch sensor used
699 System armed itself because it is being serviced or powered-up
Account Number in Page
This part of the page let’s you know where the event is occurring.
Code Indicates
XXXX 4-digits of account number
Some pager providers transmit only numbers and not alpha-characters. If your
account number contains alpha-characters, check with your provider to see
exactly how your account number will appear on your pager.
Streamlining the Page
If you feel that it is not necessary to see your account number with each page
from your system, you may elect to have the Streamlining feature turned on.
Your page will contain only an event code (Table 1 on page 29) and a sensor or
user number (Table 2 on page 29).
Ask your dealer or installer if you would like the Streamline feature turned on.
Figure 1: Sample pager reference with streamline feature turned on
Opening and Closing Reports
The Opening and Closing Reports feature allows up to three users (with pagers)
and the central station to be notified whenever the system is armed or disarmed.
Refer to the Appendix A User Sheets to see which pagers have been set up to
receive a page for this feature.
The Opening and Closing Reports feature can be enabled only by the installer.
If the feature is on, users with pagers will receive:
• an Opening Report page every time the system is disarmed:
111 for Level 1—OFF, and the user code entered.
• a Closing Report page every time a user arms the system:
222 for Level 2 or 333 for Level 3, and the user code entered.