Using a keypad to program menus, Using a keypad to program menus 24 – Interlogix TruVision PTZ Mini 12X User Manual User Manual

Page 28

Advertising
background image

2BChapter 3: Menu overview

24

TruVision Mini PTZ 12X Camera User Manual

Command Function

Camera setup

Configures digital zoom, automatic slow shutter, digital noise reduction,
video invert, image freeze, and aperture.

Pan/Tilt setup

Configures image flip, tilt limits, proportional speed, auto calibration,
password, OSD menu duration.

ID display

Configures camera site ID.

Title display

Configures camera title display.

Title setting

Configures wording of camera title.

Preset

Configures preset points.

Preset tour

Configures preset tour, preset tour step, preset position, preset tour
speed, dwell time, and manual preset tour.

Autopan

Configures autopan, start point, end point, direction, speed, and
execution.

Shadow tour

Configures shadow tour number, record start, and record end.

Auto return

Configures auto return, return action selection, preset point selection,
preset tour selection, autopan selection, shadow tour selection, return
time, and manual auto return.

Day/Night
(D/N cameras only)

Configures IR cut filter threshold, and manual control.

Alarm setting

Configures alarm setting.

Alarm detection

Configures alarm detection.

Privacy mask

Configures privacy mask.

Time and date

Configures time and date of the dome camera. The camera can time sync
to Digiplex or Impac master time signals, or can be manually set.

Schedule

Configures schedules for preset tours/autopans/shadow tours.

Using a keypad to program menus

Use a control device such as a control keypad to configure the camera menu options.
We use the KTD-405 keypad controller (Figure 2) in this manual to explain the
features of the TruVision Mini PTZ 12X Camera because of the KTD-405’s ability to
control all of the camera’s features. (For detailed keypad instructions, refer to the
KTD-405/KTD-405-2D Controller Keypad User Manual.)
You can record the settings for the dome cameras using the checklist in Appendix B
“Camera settings checklist” on page 51. This checklist also lists the d
efault values of
the settings, where applicable.

Advertising