Interlogix TruVision PTZ Mini 12X User Manual - Manual (Page 33)

3BChapter 4: Basic setup
TruVision Mini PTZ 12X Camera User Manual 29
5: Using the direction keys of the keypad select a character and press the set key to
input.
For example: A set B set C set
TITLE: ABC
6: To delete characters, select a character by moving the cursor to LEFT or RIGHT
and press set on the keypad. Then move the cursor to DELETE and press set to
delete the selected character.
7: When the title is completed, move the cursor to SAVE and press set to save it and
to return to Main Menu 2.
Preset points settings
The dome camera can be programmed to execute preset positions that can then be
recalled, for example, when an alarm is triggered or when the user requests it. See
“Schedule settings” on page 47 for more information on programming when a preset
position or tour can be triggered.
You can program up to 256 preset points depending on the protocol used.
Table 12: Preset menu description
Function Description
Preset Set Set the preset points. You need to set up at least two points in order to be
able to then set up a preset tour.
Show Preset Select the preset point that you want to execute. After pressing the set
key, the camera will turn to the appointed point.
Exit Select Yes to save any changes and return to Main Page 2.
To set a preset point
1. Display the Main Page 2 OSD screen.
2. Select Preset to enter the Preset OSD menu.
3. Select a number by either pressing the right/left keys on the keypad to select a
number (001 represents preset point 1, 002 represents preset point 2, etc.), or by
using the iris+ key to increase or decrease the number by 10.
4. Press the set key on the keypad, and then rotate the dome camera to a targeted
pan, tilt, and zoom position.
5. Press the set key again to save the defined preset point.
Once the preset point is saved, move the cursor to the next menu item to execute the
preset point and confirm it is correct.
Note: To freeze the image as the dome camera moves between preset points, see the
option “Image Freeze” under “Camera settings” on page 38.