Interlogix TruVision PTZ Mini 12X User Manual - Manual (Page 46)

4BChapter 5: Advanced setup
42 TruVision Mini PTZ 12X Camera User Manual
Function Description
back to the original position.
Password The camera is shipped without password protection. When this function
is enabled, you will be prompted to enter the password to proceed
whenever the OSD menus are accessed.
To set or change a password
1: For the password function, select On and press the set key. The New
Password screen appears.
2. Using the arrow keys on the keypad or the jogging stick, select a
number from the list and press the set key to input. For example, for
password 0134, select:
For example: 0, set, 1, set , 3, set , 4, set
Passwords must have four digits. The default password is 0000.
3: In the Confirm Password line enter the same password again to
confirm the setting.
4. Select Save and return to Main Page 1.
WARNING: Record your password in a safe place. If you should forget
your password, you will not be able to access the camera menus. Please
contact technical support for assistance.
OSD Timeout Set the period of time that menus will stay on-screen.
Select one of the time options, which is up to 5 minutes. Default value is 2
minutes. If Off is enabled, the menus remain on-screen.
Exit Select Yes to save any changes and return to Main Pag1.
Day/night (Day/night models only)
This function controls when the dome camera switches to day or night mode. The
dome camera produces high-quality color video during the day or when light levels
are high. It then switches monochrome and removes the infrared filter to improve IR
sensitivity at night or when light levels are low.
Note: This menu will only be present if the dome camera supports day/night
switching.