Interlogix TruVision PTZ Mini 12X User Manual - Manual (Page 31)

TruVision Mini PTZ 12X Camera User Manual 27
Chapter 4
Basic setup
This chapter describes how to configure the basic options for the TruVision Mini PTZ
12X Camera.
The default values (where applicable) of the settings are listed in the checklist in
Appendix B “Camera settings checklist” on page 51.
Language selection
The dome camera is shipped with on-screen display (OSD) menus available in several
languages. They include English, French, German, Italian, Portuguese, and Spanish.
The default language is English.
To change the language of the OSD menus
1. Display the Main Page 1 OSD screen.
2. Select Language. The OSD menu will automatically change to the selected
language.
Camera site ID displayed on a monitor
You can display the camera site ID on the monitor to identify each dome camera. The
ID is a number. See Figure 12 on page 22 for the on-screen position of the camera ID.
See section “Setting the dome camera site ID” on page 12 for information on setting
up a camera site ID.
To display the site ID on the monitor
1. Display the Main Page 2 OSD screen.
2. Select ID Display and then select one of the options: