Interlogix TruVision PTZ Mini 12X User Manual - Manual (Page 9)

TruVision Mini PTZ 12X Camera User Manual 5
Chapter 2
Installation
Complete all the necessary programming before you install the dome camera. This
chapter provides information on how to install the dome camera.
Use a control keyboard, such as the GE KTD-405/KTD-405-2D keypad or other control
device, to control the dome camera.
Installation environment
When installing your product, consider these factors:
• Handling: Handle the camera carefully. Avoid striking, shaking, etc. Improper
handing or storage could damage the camera.
• Electrical: Install electrical wiring carefully. It should be done by qualified service
personnel. The input electricity to the unit has a tolerance of 24 VAC ± 10%. Do
not overload the power cord or adapter.
• Ventilation: Ensure that the location planned for the installation of the camera is
well ventilated.
• Temperature: Do not operate the camera beyond the specified temperature,
humidity or power source ratings. The operating temperature of the indoor
camera is between 0°C to 50°C (32°F to 122°F) and that of the outdoor camera is
between -30°C to 50°C (-22°F to 122°F),. Humidity is below 90%.
• Moisture: Do not expose the indoor camera to rain or moisture, or try to operate it
in wet areas. The indoor camera is designed for indoor use or locations only
where it is protected from rain and moisture. Turn the power off immediately if
the camera is wet and ask a qualified service person for servicing. Moisture can
damage the camera and also create the danger of electric shock.
• Cleaning: Clean only with a dry cloth. If the dirt is difficult to remove, use a mild
liquid non-abrasive detergent and wipe gently.
• Protect from strong light: Never face the camera towards the sun. Do not aim
the camera at bright objects. Whether the camera is in use or not, never aim it at