Interlogix TruVision Intelligent IP Dome Configuration Manual - Manual (Page 22)

20 TruVision 12/32 Series IP Camera Configuration Manual
Figure 6: Camera image settings menu – Display Settings tab
Table 6: Image display parameters
Parameter Description
1. Image Adjustment
Brightness, Contrast
Saturation, Sharpness Modifies the different elements of picture quality by adjusting the
position of the values for each of parameter.
2. Exposure Settings
Iris Mode There are two settings, Auto and Manual. The type of lens determines
which setting is used. Default is Auto.
Exposure Time The exposure time controls the length of time that the aperture is open to
let light into the camera through the lens.
Select a higher value if the image is dark and a lower value to see fast
moving object.
Gain Select the value to adjust the image brightness.
3. Focus Settings
Focus mode
For the camera supports electronic lens, you can set the focus mode as
Manual or Auto. If Auto is selected, the focus is adjusted automatically,
and if Manual is selected, you can control the lens by adjusting the
zoom, focus, lens initialization, and auxiliary focus via the PTZ control
interface. Default is Manual.
4. Day/Night Switch
Day/Night Switch Defines whether the camera is in day or night mode. The day (color)
option could be used, for example, if the camera is located indoors
where light levels are always good.
Options:
Day: Camera is always in day mode.
Night: Camera is always in night mode.
Auto: The camera automatically detects which mode to use.
Schedule: The camera switches between the day mode and the night