Nas settings – Interlogix TruVision Intelligent IP Dome Configuration Manual User Manual
Page 50
48
TruVision 12/32 Series IP Camera Configuration Manual
3. Select the desired format of the snapshot, such as JPEG.
4. Select the desired resolution and quality of the snapshot.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: milliseconds or seconds.
6. Under
Capture Number
, enter the total number of snapshots that can be taken.
7. Click
Save
to save changes.
NAS settings
You can use a network storage system (NAS) to remotely store recordings.
To configure recording settings, please ensure that you have the network storage
device within the network. The NAS disk should be available within the network and
correctly configured to store the recorded files, log files, etc.
Notes:
1. Up to eight NAS disks can be connected to a camera.
2. The recommended capacity of NAS is between 9G and 2T as otherwise it may
cause formatting failure.
Figure 19: NAS menu