Interlogix TruVision Intelligent IP Dome Configuration Manual - Manual (Page 55)

TruVision 12/32 Series IP Camera Configuration Manual 53
Camera management
This chapter describes how to use the camera once it is installed and configured. The
camera is accessed through a web browser.
User management
This section describes how to manage users. You can:
 Add or delete users
 Modify permission
 Modify passwords
Only the administrator can manage users. The administrator can create up to 31
individual users for the cameras listed in this manual.
When new users are added to the list, the administrator can modify permissions and
password of each user. See Figure 21 below.
Figure 21: User management window
Passwords limit access to the camera and the same password can be used by several
users. When creating a new user, you must give the user a password. There is no
default password provided for all users. Users can modify their passwords.
Note: Keep the admin password in a safe place. If you forget it, please contact
technical support.
Types of users
A user’s access privileges to the system are automatically defined by their user type.
There are three types of user:
 Admin: This is the system administrator. The administrator can configure all
settings. Only the administrator can create and delete user accounts. Admin cannot
be deleted.