Picture overlay – Interlogix TruVision Intelligent IP Dome Configuration Manual User Manual
Page 27
TruVision 12/32 Series IP Camera Configuration Manual
25
Figure 8: Camera image settings menu – Privacy mask window
To add privacy mask area:
1. From the menu toolbar, click
Configuration
>
Image
>
Privacy Mask
.
2. Check the
Enable Privacy Mask
.
3. Click
Draw Area
.
4. Click and drag the mouse in the live video window to draw the mask area.
Note: You are allowed to draw up to 4 areas on the same image.
5. Click
Stop Drawing
to finish drawing, or click
Clear All
to clear all of the areas you
set without saving them.
6. Click
Save
to save changes.
Picture overlay
Picture overlay enables you to overlay a picture on the image. This function enables a
certain enterprise or users to overlay their logo on the image. The picture must be in
RGB24 bmp format and the maximum size of the picture is 128*128.