Interlogix TruVision Intelligent IP Dome Configuration Manual - Manual (Page 24)

22 TruVision 12/32 Series IP Camera Configuration Manual
Parameter Description
Noise Reduction Level Only available when DNR is set to Normal Mode. Set the level of noise
reduction in the Normal Mode. Higher value has a stronger noise
reduction. Default is 50.
Time/Space DNR Level Set the level of noise reduction level in Expert Mode. Default is 50.
Note: If you set a higher value, the image may not be clear.
Defog Mode You can enable the defog function when the environment is foggy and
the image is misty. It enhances the subtle details so that the image
appears clearer.
EIS Electrical Image Stabilizer reduces the effects of vibration in a video.
Grey Scale You can choose the range of the grey scale as [0 to 255] or [16 to 235].
Default is [0 to 255].
8. Video Adjustment
Mirror It mirrors the image so you can see it inversed. Left/Right, Up/Down,
Center, and OFF are selectable.
Hallway View To make a complete use of the 16:9 aspect ratio, you can enable the
rotate function when you use the camera in a narrow view scene.
When installing, turn the camera to the 90 degrees or rotate the 3-axis
lens to 90 degrees, and set the rotate mode as on, you will get a normal
view of the scene with 9:16 aspect ratio to ignore the needless
information such as the wall, and get more meaningful information of the
scene. Default is OFF.
Scene Mode Choose the scene as indoor or outdoor according to the current
environment.
Video Standard 50 Hz and 60 Hz are selectable. Select the standard according to the
different video standards; normally 50 Hz for PAL standard and 60 Hz for
NTSC standard.
Capture Mode Set the desired frame rate to meet the different demands of field of view
and resolution. A higher frame rate may be required in a location with a
lot of movement (such as a money depot).
9. Other
Local Output Select ON or OFF to enable or disable the BNC output. Default is ON.
Note: Not all camera models support all these parameter settings.
OSD (On Screen Display)
In addition to the camera name, the camera also displays the system date and time on
screen. You can also define how the text appears on screen.