Corinex Global ADSL2+ - Manual (Page 117)

116
Appendices
Corinex ADSL2+ Wireless Gateway G
starts blinking, it means that the reset process is complete. The default settings are
then restored.
How do I resolve issues with signal loss?
There is no way to know the exact range of your wireless network without testing.
Every obstacle placed between the Gateway and a wireless PC will create signal loss.
Lead glass, metal, concrete floors, water and walls will inhibit the signal and reduce
range. Start with the Gateway and your wireless PC in the same room and move it
away in small increments to determine the maximum range in your environment.
You may also try using different channels, as this may eliminate interference affecting
only one channel.
I have excellent signal strength, but I cannot see my network.
WEP is probably enabled on the Gateway, but not on your wireless adapter (or vice
versa). Verify that the same WEP keys and levels (64 or 128) are being used on all
nodes of your wireless network.
How many channels/frequencies are available with the Gateway?
There are fourteen available channels, ranging from 1 to 14. For 802.11g we support
11 channels for North America, 13 for Europe (ETSI) and 14 for Japan.
How can your technology be beneficial in general?
General benefits are inexpensiveness, fastness and reliably manageable installation.
How can your technology be beneficial for me as Internet provider?
Our technology lowers the costs, and adds manageability.
How can your technology be beneficial for me as Internet user?
Lower the cost, reach points where there is no other alternative.
If your questions are not addressed here, refer to the Corinex website,
www.corinex.com .