Corinex Global ADSL2+ - Manual (Page 81)

80
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
For setting up static routing, please select a connection from the list, fill the New
Destination IP, Netmask, Gateway IP and Metric. After that, click on Apply.
If you want to delete an existing static route, check the Delete checkbox next to the
route information and click on Apply.
4.4.19 Dynamic Routing
Dynamic Routing uses RIP (Routing Information Protocol) for exchanging routing
information with other routers in the network. It is supported across both WAN
and LAN interfaces. When RIP (Routing Information Protocol) is enabled the router
builds its own routing tables utilizing request and response packets. A request packet
tells the router to build a list of its routing table contents with the network/host IP
to which the table belongs, Netmask for the network and RIP host. After obtaining
this information, the router will send a response to the machine that sent the original
request. RIP will also update the main routing table.
4.4.18 Static Routing
The Gateway allows you to manually program the router’s routing table. Up to 16
routes can be added.