Corinex Global ADSL2+ - Manual (Page 28)

27
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Note: if you receive an error message, please double check that the Gateway is
connected to the DSL line and the entered authentication data are correct.
Your ADSL2+ Wireless Gateway G is now connected to the internet.
Click on Save All Settings once you’ve successfully established a connection, so
that all settings are saved. Your gateway will then connect to the internet automati-
cally after each restart.
4.3.2 LAN Configuration
This section allows you to configure the local area network settings of your Gate-
way. There are three LAN network interfaces which can be assigned to groups.
Each group can have different settings such as IP address, settings of the DHCP
server etc.
Physical Network Interface Description
Ethernet LAN containing all devices connected to one
of the RJ45 ports of the Gateway.
WLAN LAN containing all devices connected to the
wireless access point of the Gateway.
USB LAN containing all devices connected to the
USB port of the Gateway.