Corinex Global ADSL2+ - Manual (Page 40)

39
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Field Description
Authentication Three authentication options are available: auto, Chal-
lenge Handshake Authentication protocol (CHAP),
and Password Authentication Protocol (PAP).
MTU Maximum Transmit Unit the DSL connection can trans-
mit. It is a negotiated value that asks the provider to send
packets of no more than n bytes. The maximum specified
value is 1500 although some DSL/ISP providers require a
larger value. The minimum MTU value is 128.
On-Demand Enables on-demand mode. The connection will disconnect
if no activity is detected after the specified idle timeout
value.
Default Gateway If checked, this connection becomes the default gateway
to the Internet.
Debug Enables PPPoA connection debugging facilities. You can
read about debugging in the following text.
PPP UNnumbered This is a special feature for telecommunication. It is used
for assigning blocks of public addresses to the client and
makes the PPP appear as pass-through.
LAN The LAN field associated with the PPP UNunmbered field.
The packets need to go through specific LAN when the
PPP UNnumbered feature is activated.
The VLAN Settings include the options showed in following table:
Field Description
Sharing This is where you enable/disable sharing. The VLAN needs
to be selected to create VLAN.
VLAN ID VLAN Identification
Priority Bits Priority is given to a VLAN connection from 0-7, 0 means
highest priority.