Corinex Global ADSL2+ - Manual (Page 63)

62
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Field Definition/ Description
Choose a connection This field allows you choose a connection from
the list of available connections. For example
choose a WAN connection to enable IP QoS
for the Upstream traffic of the Modem. On
the other hand choose the LAN connection
(Ethernet and USB Bridged) for the down-
stream traffic.
Low Priority weight Medium
priority weight These 2 fields will allow you to select the
weights of the Medium and Low priority
queues in increments of 10 percent, so that
that the sum of the weights of these 2 queues
is equal to 100 percent.
Enable IPQoS This field allows you to enable/disable IP QoS
for the chosen connection.
Note: If IP QoS is enabled and no rules are
defined, a default rule is applied to the con-
nection. The default rule puts all the traffic to
be transmitted in the Low Priority queue
Trusted Mode The NSP has two primary modes of opera-
tion with regard to queue traffic prioritization
- Trusted and Un-trusted. This field allows you
to choose the mode - Trusted (checked) and
Un-trusted (Unchecked).
In Trusted mode all the rules will be
applied first, regardless of the setting of the
TOS bits. After the rules have been exhausted
the existing TOS bit settings will be honored.
The Un-trusted mode will match first against
all rules as in Trusted mode. The difference is
that if there is no match then a default rule will
be used. The default rule will have an associ-
ated queuing priority - Low.
In case you enabled the IP QoS field, you can add detailed rules for QoS.
For adding a rule, please select the connection from the choose a connection list
and click Add. The following screen will appear: