Corinex Global ADSL2+ - Manual (Page 13)

12
Product Specification
Corinex ADSL2+ Wireless Gateway G
5 DC IN (9V) to connect to the Power Supply Adapter.
6 POWER SWITCH to power on or off the gateway (I - ON position, O - OFF
position).
7 RF Antenna 180° 2.4 Ghz Wireless Antenna for wireless networking.
To activate the factory default reset function:
- Ensure that your ADSL2+ Gateway is powered on.
- Use a paper clip or a pencil tip to press the reset button, hold for at least 10 secs and release.
At this point, the Wireless indicator and DSL indicator will turn off. The reset is in progress.
- When the Wireless indicator starts blinking, it means that the reset process is complete.
The default settings are then restored.
- DSL line is synchronized once the DSL indicator color is green.
NOTE: By executing the reset procedure, all customized settings that
you have saved will be lost and the gateway will be set back to the
original factory default settings as they are described in this
document.
2.3 Safety Labels
Content of the Label on the Bottom of the Corinex ADSL2+ Wireless
Gateway G
The label shows the voltage and current values for your Gateway. It also shows
all three MAC Addresses (WAN, LAN and WLAN), serial number (SN) and the
firmware version.