Corinex Global ADSL2+ - Manual (Page 82)

81
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
In the table below you can see the description of this page.
Field Description
Enable RIP Enable/Disable RIP
Protocol The following three RIP versions are available:
•RIP v1
•RIP v2
•RIP v1 compatible.
Enable Password The 16 character long plain text password.
Password Netmask of the source IP on your LAN side.
Direction Normally when RIP is enabled on a router it dynami-
cally learns routes on all it’s configured interfaces. This
parameter allows the user to select the interfaces on which
RIP is expected to learn and distribute routing informa-
tion. This feature allows the user to control how and which
routes get distributed through the network e.g. prevent
routes to the private LAN networks from being sent over
to the WAN side router. The following four direction op-
tions are available:
• Both: Receive updates on the interface and also send it’s
routing table to other routers connected to that
interface.
• In: Receive routing updates from other routers connect-
ed to that interface but NOT send routing updates on
that interface.
• Out: Send routing updates but not receive updates on
this interface from the other routers connected to that
interface
• None: Ignores this interface and not send or receive
routing updates through this interface.