Corinex Global ADSL2+ - Manual (Page 78)

77
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Field Description
Enable Bridge
Filters Enable Bridge Filters button allow the user to enable or dis-
able bridge filtering. It can be set/unset during any add/edit/
delete operation. It can also be set/unset independently by
just pressing the Apply button.
Enable Bridge
Filter Management
Interface When checked, it enables the Bridge Filter Management
Interface field.
Select LAN Select your LAN group.
Bridge Filter
Management
Interface You can choose from Ethernet, USB, and WLAN. .
SRC MAC The source MAC address. It must be in a xx-xx-xx-xx-xx-
xx format, with 00-00-00-00-00-00 as “don’t care”. Blanks
can be used in the MAC address space, and would be
considered also as “don’t care”.
SRC Port Source port. You can choose from Any, Ethernet, USB, and
WLAN.
Dest MAC The destination MAC address.
Dest Port Destination port. You can choose from Any, Ethernet, USB,
and WLAN.
Protocol You can choose from the following options: PPPoE Session,
PPPoE Discovery, IPX - Ethernet II, RARP, IPv6, IPv4, and
Any.
Mode There are two modes: Deny and Allow.
4.4.15 Web Filters
Web Filters allow you to manage the type of web content that passes through your
gateway.
The following content types are disabled by default:
• Proxy Server
• Cookies
• Java Applets
• ActiveX Controls
• Pop-Ups
To enable, simply check Enabled, then click Apply.