Chatsworth Products RIM-600 - Manual (Page 23)

Chapter 1: Installation
23
Chapter 1: Installation
23
Operating Environment
Before you install the RIM-600 Host be sure that your operating environment meets the physical
requirements of the equipment.
Operating Temperature: 32º–122º Fahrenheit (0º–50º C)
Humidity:
5–90 %RH, non-condensing
Power: 90–260VAC 47/63 Hz outlet within 6'
Rack Requirements: Standard 19" equipment rack with supplied mounting bracket
hardware. Requires 1.0 EIA rack mount space.
Tabletop requirements: Flat area which can support an enclosure 17" wide by 10" deep by 2"
high.
Rack Mount Installation
The RIM-600 Host can be rack mounted using the included rack mount brackets. Follow the steps
below:
1) Attach rack-mount brackets to the sides of the Host unit with a Phillips screwdriver.
2) Attach the unit to the equipment rack using two pan-head screws per side. Tighten the
screws with a Phillips screwdriver.
3) Plug the power cord into a 90-260VAC outlet.
Figure 3: Rack-mounted Host Unit
Wall Mount Installation
The RIM-600 Host can be wall mounted using the optional wall mount brackets. Follow the steps
below:
1) Attach the optional wall mount brackets to the sides of the RIM-600 using the eight black
#6-32 screws. A Phillips screwdriver will be required. (Order part # 60075-001 Universal
Wall Mount Kit)
2) Attach the unit to the wall using two screws per side. Tighten the screws with a Phillips
screwdriver.
3) Plug the power cord into a 90-260VAC outlet.