Chatsworth Products RIM-600 - Manual (Page 77)

Chapter 2: Software
77
Web Page
The RIM-600 will produce a web page which includes:
• The status of all Environmental Inputs and IP Alarms.
• The ability to program most parameters.
• Links to view logged data for each Input and IP alarm.
• Links to view historical alarm information for each Input and IP alarm.
• Graphs of the last 24 hours of logged data.
• The present state of all PowerGate outlets.
• Links to Live images from cameras.
Figure 49: RIM-600 Web page
The Web Page must be enabled through the Local Configuration process via the Host’s serial port.
Optionally, the web page can also be password protected. You can program most parameters through
the web page if the Web Page Programming option is enabled. This can be secured with the same
permissions options as with the ConsoleView software. To gain access to the programming screens,
you must log in on the web page.
To view the Web Page, simply type in the Host’s IP address in your web browser.
Graphs
Anything you are data-logging, you can also graph. Graphs represent the last 24 hours of logged
data for the particular Environmental/IP element you choose to view.
To view a graph on your Web Page:
1) Select the Unit.
2) Select Environmental/IP alarms
3) Select a specific environmental or IP from the displayed list (Ex: AC Power)
4) Click the Graph button.
Chapter 2: Software
77