Chatsworth Products RIM-600 - Manual (Page 62)

RIM-600 Manual
62
The “Enable This Profile” option provides a convenient way to temporarily enable or disable a User
Profile. When a Profile is disabled (unchecked), no alarms or reports will be sent to that user, and
the user will not be permitted to log on to the system.
Clicking the Permissions button will bring up the Permission screen.
Permissions
Each user profile has a programmable security level for each device (host/nodes) in the system. To
set the Security Access level click the Permissions button. There are three access levels: Master
System Administrator, Site Administrator, and User. The restrictions for each security level is as
follows …
Master
System Site
Admin Admin User
Add user profiles Yes No No
Disable user profiles Yes No No
Edit unit properties Yes No No
Edit e-mail settings Yes No No
Edit Node properties Yes No No
Update firmware Yes No No
Configure data logger Yes No No
Add/delete classes Yes No No
Add/delete holidays Yes No No
Edit default input templates Yes No No
Delete sensors Yes Yes No
Disable IP alarms Yes Yes No
Reset min/max Yes Yes No
Other programming changes Yes Yes No
Add camera Yes Yes No
Acknowledge alarms Yes Yes Yes
Switch a PowerGate outlet Yes Yes Yes
Online via local PC Yes Yes Yes
Call in via voice Yes Yes Yes
Call in via modem Yes Yes Yes
Visit password protected Web Yes Yes Yes
To configure a profile as a Master Administrator simply check the box at the top of the screen.
62